UTILIS S.A.S ZAC Eurotransit RUE ABBE MARIOTTE 57365 ENNERY FRANCE
T: +33 (0)3 87 71 60 74 W: www.utilis-international.com Email: contact@utilis.fr
3
3
EQUIPMENT DESCRIPTION
Frame is made of :
- One (1) Roof Assembly - Ridge Hinge Assemble, Roof Arches, Ridge Purlins, and Eave Purlins.
- Eight (8) Side Arches - hold up the roof assembly and each has foot to level the tent and also
for staking
- Which means a total of 9 parts for the frame.
The dimension of the deployed frame is :
- 9,00 m x 6,00 m on the ground, which means a ground surface of 54 m².
- Frame is made from Aluminium.
- Profiles are made from alloy 6060 T5 (AFNOR - EN 573 standard )
- RAL 6014 lacquering (Epoxy powder) for military version.
- Mechanical parts are entirely made in machining process in AU 2017
- The surface finish for salt resistance is made by anodising (matte black)
- Axles and screws are in stainless steel.
Canvas
Canvas is made from 480 g/m² polyester PVC coated on both sides. The canvas parts are assembled by
high frequency welding.
Canvas is mildew and UV resistant. It withstands temperatures between -30 and +70°C.
The shelter includes a groundsheet and a roof net to hang some elements like lights, electrical boxes,
inner liner, etc.
Both elements are integral parts of the canvas but are removable. It is packed in a carrying bag with
handles.
Shelter applications
The shelter can be used between -30° et +50°C.
When stacked, the shelter can withstand 110 km/h wind. However, if the wind exceeds 50 km/h during
the set-up, the frame should be stacked. It is water and UV resistant.
To Next Page
Loading...