StatusLED Indicator Instruction
The red/green light
ashing alternately
The green light is
always on
The red light
ashing
The red light is
always on and
beeps long
Ready to work
.
Working status.
Low power of the jump starter.
Please try to replace the startup power
supply or change it in time.
1. Battery clamp is reversely
connected.
Please check whether the clamp is
reversely connected.
2. The clamp is short-circuited.
Please check whether the red and
black clamps together connect or
connect both cable clamps to the
same piece of metal.
Normal
Normal
!
Abnormal
!
Abnormal
10EN
In any of the following situations, the smart clamp turns protection on:
To Next Page
Loading...
