7 Trouble-shooting and error messages
35
… flashes in the display
… flashes in the display
… and illuminates in the display
Possible cause Solution
• The excess temperature
protection of a cooking
zone was triggered.
➤ Allow the cooking zone to cool down.
➤ Resume cooking on a different cooking
zone.
➤ Check the cookware.
Possible cause Solution
• An interruption in the
power supply.
➤ Press any touch button to cancel the error
message.
➤ The appliance can be used again as
normal.
Possible cause Solution
• An object, e.g. paper,
underneath the hob is
affecting the air intake.
➤ Remove any objects in the drawer
underneath the hob.
➤ Press any touch button to cancel the error
message.
➤ After 10 minutes the appliance can be used
again as normal.
• Ventilation is defective.
➤ Note down the error number.
➤ Note down the serial number (FN) of the
appliance. See the identification plate for
this.
➤ Call Customer Services.
To Next Page