Need help?Do you have a question about the V-ZUG Unimatic SL and is the answer not in the manual?
Explains the meaning of symbols used in the manual for safety and information.
Provides general safety guidelines for operating the appliance and for children.
Lists safety measures specific to this washing machine model.
Details initial setup and correct usage procedures for the appliance.
Highlights critical warnings regarding burns, injury, and life risks associated with appliance use.
Provides tips on preventing damage to the washing machine during operation and cleaning.
Information on safe handling and recycling of packaging materials for children's safety.
Instructions for safe disconnection from utilities and environmentally friendly disposal of the appliance.
Guide to removing transport lock, setting language/time, and performing the first wash cycle.
Locates the appliance's identification plate for serial number and model information.
Details the appliance's features, capacity, programmes, and functions.
Explains the physical construction, operating controls, and display elements of the machine.
Lists and describes main wash and standard cotton programmes with their uses.
Explains extra programmes like Easy care, Pre-wash, Sprint, Steam anti-crease, AquaPlus.
Details programmes for Skin protection, specific fabric types (Cotton/Mix, Shirts, etc.), and soiling degrees.
Covers separate rinsing/spinning, Bio wash, and Soap wash programme variations.
Explains functions like temperature, spin speed, delayed start, pause/door opener.
Guide to changing appliance settings like language, time, date, and childproof lock.
Instructions for setting time/date and managing the childproof lock feature.
How to manage automatic door opener and adjust display brightness.
Procedures for resetting to factory defaults and changing the display language.
Steps to prepare, connect, and load the washing machine correctly.
Instructions for adding powder or liquid detergent, including dosage and compartment details.
Guide to selecting main, additional, and special programmes with various options.
How to change temperature, spin speed, delayed start, and manage the end of the programme.
Procedures for changing selections, aborting programmes, and opening the door during operation.
Daily procedures for the end of use, including hygiene recommendations and cleaning.
Guide to cleaning the detergent dispenser drawer and the water inlet filter.
Procedures for emergency draining and cleaning the foreign body trap for maintenance.
A comprehensive guide to identifying and resolving common appliance faults and error messages.
Troubleshooting for spin stop due to unbalanced loads, vibration, and door opening problems.
Addresses issues like long programme times, foam, hygiene recommendations, and low water flow.
Solutions for door opening failures, water sounds, detergent traces, and demo mode.
Detailed steps for opening the appliance door manually during a power outage.
Tips on fabric care symbols, detergent use, and general washing practices.
Guidance on Net curtains programme, and tips for energy and water economy.
Troubleshooting common wash result issues like white/grey residue, hard feel, and colour run.
Advice on dealing with fabric stains and preventing fabric wear or damage.
Provides physical dimensions, water connection, and electrical requirements.
Details EU product fiche information, energy/water consumption, and noise levels.
Data on programme consumption, and explanations of economy systems like VAS and sensors.
Notes for testing institutes and explanation of the VAS vibration system.
Information on turbidity sensor for water optimization and automatic energy-saving stand-by.
Information on how to contact service centres and request repair appointments.
Contact details for general inquiries, ordering parts, and service agreements.
To Next Page
General
