V2 ELETTRONICA PD1 User Manual

27
FUNCTION TABLE PD1
DISPLAY DATA DESCRIPTION DEFAULT MEMO
DATA DATA
ASM t.AAS=2.0s
no
t.AAS
StoP no
no
invE
ProS
Fot 1 no
no
APCh
CoSt
Fot 2 CFCh
no
CFCh
Ch
tEL 1
tEL 2
tEL 3
tEL 4
Fine no/Si no
Motor antiskid
- Antiskid function is not active
- Antiskid function active with additional time adjustable from 0 to 120 s
Input STOP
- Input STOP not available
- STOP com. stops the gate: START com. starts moving in the opposite direction
- Input STOP stops the gate: pressing the START com. gate continues the motion
Input PHOTO 1
- Not available
- Input is available for the connection of the photocell
- Input is available for the connection of the rib
Input PHOTO 2
- Not available
- Input available : photocell is active in closing and also when the gate is still
- Input available : photocell active during the closing
Radio input associated to START command
Radio input associated to Ped. START command
Radio input associated to STOP command
Radio input associated to courtesy light
End of programming

V2 ELETTRONICA PD1 Specifications

General

Brand	V2 ELETTRONICA
Model	PD1
Category	Control Unit
Language	English