16 INSTALLATION AND OPERATING INSTRUCTIONS
It is important to ensure that all parts of your VACPRO sealing
system is cleaned on a regular basis.
Follow the care and cleaning guidelines below:
1. Always unplug the unit before cleaning.
2. Do not immerse appliance in water or any other liquid.
3. Do not use abrasive cleaners to clean the unit.
4. Wipe the outside of the unit with a damp cloth, sponge or mild
dish soap.
5. Wipe away food residue and water inside or around component
with a paper towel.
6. Dry thoroughly before use.
Cleaning Removable Vacuum Chamber, and Lower Gasket:
Remove the Removable Vacuum Chamber from unit and clean with
warm soapy water and then rinse thoroughly. Alternatively place
Removable Vacuum Chamber in a dishwasher. Ensure Removable
Vacuum Chamber is completely dr y before installing and using
in appliance.
Remove Lower Gasket from its indentation location and wash with
warm soapy water then rinse thoroughly. Ensure Lower Gasket is
completely dry before installing back into indentation location.
IT IS IMPORTANT
that the lower gasket is not out of shape or
damaged in any manner otherwise air tight seal will not be formed
with Upper Gasket when cover is closed.
CLEANING AND MAINTENANCE
To Next Page
Loading...