Vacon NX series - Page 276

1.
the settings of parameters ID312 to ID314 (applications 3,4,5) or
2.
to which output the temperature limit supervision signal (parameter ID450) is connected
(applications 6 and 7).
355 FREQUENCY CONVERTER TEMPERATURE LIMIT VALUE 34567 (2.3.21, 2.3.4.12, 2.3.2.12)
This temperature value is supervised by parameter ID354.
356 ANALOGUE SUPERVISION SIGNAL 6 (2.3.4.13)
With this parameter you can select the analogue input to be monitored.
Table 136: Selections for parameter ID356
Selection
number
Selection name Description
0 Not used
1 AI1
2 AI2
3 AI3
4 AI4
357 ANALOGUE SUPERVISION LOW LIMIT 6 (2.3.4.14)
358 ANALOGUE SUPERVISION HIGH LIMIT 6 (2.3.4.15)
These parameters set the low and high limits of the signal selected with parameter ID356.
VACON · 276 PARAMETER DESCRIPTIONS
8
TEL. +358 (0)201 2121 · FAX +358 (0)201 212 205