Need help?Do you have a question about the Vacron Digital Video Recorder and is the answer not in the manual?
Important safety instructions and warnings for operating the DVR.
Precautions for safe operation and handling of the DVR to prevent damage.
Adjusting Hue, Brightness, Contrast, and Saturation for camera video.
Setting up Dynamic DNS and email notifications for system events.
Setting the system date, time, format, and time zone, including NTP synchronization.
Formatting the HDD, configuring overwrite, pack time, and error buzzer.
Adjusting GUI display mode, switching times, sequence, and video margins.
Viewing system info and managing user accounts and passwords.
Configuring system language, function tips, and audio volume levels.
Performing firmware updates, loading defaults, rebooting, and shutting down the DVR.
Overview of the H264 Player interface and its controls for playback.
Steps to install the mobile monitoring software on an Android device.
Alternative method for installing Android software via APK file.
Configuring connection settings and saving favorite profiles for Android monitoring.
Instructions for operating the mobile monitoring application on Android devices.
Guide for downloading and installing the mobile monitoring software on an iPhone.
Detailed steps for installing the iPhone monitoring application from the device's memory.
Configuring connection settings and saving favorite profiles for iPhone monitoring.
Instructions for installing and setting up the mobile monitoring software for Windows Mobile devices.
Steps to install ActiveX add-on and access the web interface for DVR control.
Explains how to use the web interface for live monitoring, recording, and playback.
Configuring individual camera settings like title, position, and display.
Setting recording enable, resolution, frame rate, quality, and pre-record time.
Configuring motion detection enable, sensitivity, area, and duration.
Configuring network type, IP address, ports, DDNS, and email alert settings.
Searching system logs by type, start date, and end date.
Configuring system date, time, HDD, and display parameters.
Viewing system info, managing user accounts, and setting audio levels.
Performing system maintenance tasks and configuring host settings.
To Next Page
General