Packing pressure
Packing pressure could vary greatly depending on the soil type, moisture and crop being seeded. The
following considerations should be considered when setting opener pressure.
• The opener chain is the key visual guide to ensure you are at least set at the lowest minimum packing
pressure. When in the field, pay attention to the opener chains behind your tractor wheels/mainframe
wheels. During field operation, the chain should be remaining tight. It is considered normal for it to
“twitch” momentarily while seeding but should stay tight for the most part.
• The packing pressure operational range is 800-1500 psi
• In wet conditions, you will likely be in the 800-1100 psi range.
• In dry conditions, you will likely be in the 1100-1500 psi range.
• Always check your furrow to ensure you are achieving a consistently packed finish.
• You can set a packing pressure lower than 800 psi, depending on conditions. This would mostly be
recommended for your when you utilize your “quick dump override”.
Packing Pressure Display/Button Packing Pressure Adjustment Page
To Next Page
Loading...
