Reference
Installation instructions geoTHERM 0020051574_04 119
16
Details for VWW Details
Size of the mass flow rate which can be taken from the well.
Well water pump type
Details regarding the heat consuming system Details
If a second pump was incorporated to overcome the pressure
losses: Manufacturer and type of the second pump
Heating load of the underfloor heating
Heating load of the wall heating
Heating load of the combination underfloor heating/radiators
Was a secondary return installed? (Yes/No)
Commissioning of the heat pump installation Details
Checks before handing over to the user
Pressure of the heating circuit in a cold state
Does the heating system get warm?
Does the water in the DHW tank get warm?
Were the basic settings made on the controller?
Was the legionella protection function programmed? (Interval and
temperature)
Handover to the user Details
Was the user instructed on the following points?
Basic function and operation of the controller
Operation of externally placed bleed valves
Maintenance intervals
Documentation handover Details
Was the operating instructions handed over to the user?
Was the installation manual handed over to the user?
Were the manuals for all the accessories handed over to the user?
16.1 Reference checklist
To Next Page
Loading...
Need help?
General