Installation
18 Installation instructions geoTHERM 0020051574_04
4
b
Caution!
There is a risk of damage due to unsuita-
ble frost and corrosion protection agents.
Unsuitable frost or corrosion protection
agents may damage seals and other com-
ponents and may therefore also cause leaks
in the water outlet.
> Only add permitted frost or corrosion
protection agents to the heating water
For heating installations that are overwhelmingly fitted with
thermostatically or electrically controlled valves, you must
ensure that the flow through the heat pump is continuous
and sufficient. Irrespective of the choice of heating installa-
tion, the rated volume flow of heating water (¬Tab.14.1 or
¬Tab.14.2) must be guaranteed.
4.5 Check the scope of delivery
1
2
3
7
8
5
4
6
14
13
10
12
11
9
4.4 Check the scope of delivery.
For the key, see tab. 4.3
The heat pump is delivered on a pallet and consists of three
packing units.
> Check the heat pump and the operating panel that is
packed separately for any damage caused in transit.
To Next Page
Loading...
Need help?
General