Vaillant geoTHERM Installation Instructions

Adapting the appliance to the heating system
86 Installation instructions geoTHERM 0020051574_04
9
9.7.3 Menu I: Display general information
Display shown Description Factory setting
Menu I: Displaying general information In Menus I1 to I4 you can obtain information regarding
the settings for the heat pump.
Error History
I1
Fault number >1
Fault code 96
10.03.10 07:18
Pressure sensor coolant error
Display of the error memory, showing the last 20
errors in the order they appeared.
The last fault to appear always has fault number 1.
The fault number is displayed with fault code, date/
time of occurrence and a brief fault description. The
error number shows the order in which the errors
occurred. The error code identifies the error. A list
can be found in ¬Ch.11.
Turning the adjuster
displays the next fault.
—
Statistics
I2
Compressor hours 7hours
Compressor starts 33
Auxiliary heater operation 2hours
Auxiliary heater starts 21
Compressor hours: Compressor operating hours to
date.
Compressor starts: Number of compressor starts to
date.
Auxiliary heater operation: Auxiliary heater operat-
ing hours to date.
Auxiliary heater starts: Number of auxiliary heating
starts to date.
—
Software versions
I3
I/O card 1 4.04
User Interface 1 3.04
VR 90 4 2.21
I/O card: S
oftware release I/O card (PCB in the heat
pump).
User interface: User interface software version (dis-
play in the operating panel).
VR 90: displays the software release when a VR 90 is
connected.
—
9.8 Menu I: Displaying general information

Vaillant geoTHERM Specifications

General

Brand	Vaillant
Model	geoTHERM
Category	Heat Pump
Language	English