Need help?Do you have a question about the Vaillant V 12-060 M2W and is the answer not in the manual?
General| Refrigerant | R410A |
|---|---|
| Outdoor Unit Noise Level | 52 dB(A) |
| Indoor Unit Noise Level | 38 dB(A) |
| Power Supply | 50Hz |
| Outdoor Unit Dimensions (HxWxD) | 550 x 780 x 285 mm |
Explains the meaning of danger and warning symbols used in the manual for safety.
Defines the intended purpose of the unit and highlights installer responsibilities for correct usage.
Details the function, dimensions, and weights of the indoor unit based on model.
Describes the function, dimensions, and weights of the outdoor unit for various models.
Explains the function of the infra-red remote control for unit settings.
Lists the connections and shut-off valves for the outdoor unit's refrigerant system.
Lists the accessories supplied with the indoor and outdoor units.
Provides detailed technical data for indoor and outdoor units across different models.
Specifies that only qualified personnel with refrigerant handling certification should install the unit.
Outlines general safety measures and compliance with regulations before starting installation.
Illustrates the general installation layout and required minimum clearances for the unit.
Guides on choosing the optimal location for the indoor unit, considering clearances and airflow.
Details the steps for correctly mounting the plate for the indoor unit.
Provides instructions on how to properly drain condensate water from the indoor unit.
Outlines safety precautions and best practices for handling refrigerant pipes.
Details how to correctly install the condensate pipe to prevent leaks and blockages.
Explains how to make holes in the wall for routing pipes for the indoor unit.
Details the correct procedure for connecting refrigerant pipes to the indoor unit.
Guides on how to securely hang and attach the indoor unit body to the mounting plate.
Specifies criteria for choosing a suitable location for the outdoor unit, ensuring accessibility.
Advises on planning refrigerant pipe routing to ensure proper oil return to the compressor.
Describes the process for connecting refrigerant pipes between the outdoor and indoor units.
Details how to connect the condensate drain pipe to the outdoor unit.
Lists essential safety measures to be followed during electrical wiring installation.
Provides installation conditions to prevent electromagnetic interference as per Directive 2004/108/CE.
Explains the step-by-step process for connecting electrical wiring to the indoor unit.
Details the procedure for connecting electrical wiring to the outdoor unit.
Presents electrical specifications and requirements for different unit models.
Outlines the procedure for pressure testing the refrigerant circuit to detect leaks.
Describes the process of evacuating the refrigerant circuit using a vacuum pump.
Details the steps for starting up the unit after installation and evacuation.
Provides guidance on how to handle gas leaks and refrigerant management during operation.
Lists error codes and their corresponding descriptions for specific unit models.
Lists error codes and their indicators for the V 12-060 M2W model.
To Next Page