Need help?Do you have a question about the Vaillant VRC 700/6 and is the answer not in the manual?
General| Connectivity | eBUS |
|---|---|
| Compatibility | Vaillant heating systems |
| Mounting | Wall-mounted |
| Protection Class | IP20 |
| Programming | 7-day time programs |
| Operating Voltage | 24 V DC |
| Ambient Temperature | 0°C to 50°C |
| Type | Weather-compensated control |
| Temperature Control | Weather and room temperature |
Classification of warnings by danger severity using symbols and signal words.
Specifies the product's intended application and defines improper use.
Provides crucial safety advice, including risks from frost and improper operation.
Emphasizes the need to follow all enclosed operating instructions.
Advises users to keep instructions and other documents for future reference.
Specifies the product article number and region to which the instructions apply.
Defines key terms like "System control" and "Remote control" for clarity.
Explains that functions depend on the installed system configuration.
Illustrates the physical components of the VRC 700 system control with numbered parts.
Outlines the system control's role as a weather-compensated controller, covering heating, cooling, ventilation, DHW, and circulation.
Explains how the building is divided into zones for different heat demands and how the system controls them.
Covers the location of the data plate, how to find serial numbers, and the meaning of the CE marking.
Describes the two adjustment and display levels: end user and installer, and menu structure.
Explains the basic display and its content for various operating modes.
Details how to operate the system using buttons and the rotary knob.
Guides on how to change the desired day temperature for heating.
Guides on how to change the desired day temperature for cooling.
Explains how to set ventilation levels for different operating modes.
Details setting desired cooling temperatures for advanced functions.
Explains how to change the display language.
Guides on setting the current date and time for the system.
Covers settings related to the display, including contrast and button lock.
Details how to access and understand system status information like fault status and operating mode.
Provides access to fault status, Green IQ, water pressure, system status, burner, and collector temperature.
How to read energy consumption for heating and hot water for current month, last month, and history.
How to view diagrams for solar, environmental, electrical, fuel, and heat recovery yields.
How to set desired day and set-back temperatures for heating and cooling in a zone.
How to read the current room temperature.
How to read air quality sensor values and exhaust air humidity.
How to read energy consumption for heating and hot water for the current month.
How to read energy consumption for heating and hot water for the last month.
How to read energy consumption for heating and hot water since start-up.
How to view diagrams for solar, environmental, electrical, fuel, and heat recovery yields.
How to find the installer's contact information.
How to access the product's serial and article numbers.
How to set desired day and set-back temperatures for heating and cooling in a zone.
How to set the desired domestic hot water temperature.
Illustrates a time period example for the heating operating mode.
Tips for setting time programmes efficiently.
How to view and modify time periods within blocks.
How to set time programmes for heating, cooling, DHW, circulation, ventilation, and high tariffs.
How to set a period and temperature for when away from home.
How to schedule a day at home, activating automatic mode with Sunday settings.
How to change the display language.
Step-by-step guide to selecting the desired display language.
Instructions for setting the current date and time.
How to configure automatic or manual daylight saving time adjustments.
How to adjust display contrast for optimal readability.
How to activate and deactivate the button lock feature.
How to choose which data (heating, cooling, ventilation) appears in the basic display.
Explains how to specify tariffs in currency per kWh for cost calculations.
How to set the tariff for the auxiliary heater for cost calculation.
How to set the low tariff electricity rate for cost calculations.
How to set the high tariff electricity rate for cost calculations.
How to offset the measured room temperature value.
How to offset the measured outdoor temperature value.
How to modify factory-set zone names.
How to activate heat recovery or set it to auto.
How to set the maximum room air humidity to activate a dehumidifier.
How to reset time programmes or all settings to their default values.
How to configure the heating installation's operation for heating.
How to configure the heating installation's operation for cooling.
How to define the ventilation unit's operation.
How to configure operation for domestic hot water generation.
Notes that circulation mode matches hot water mode.
How to activate manual cooling for a specified number of days.
How to activate a function that uses Sunday settings for heating.
How to activate a function for periods away from home, setting back temperature.
How to activate ventilation boost for 30 minutes.
How to activate a function for simultaneous heating, hot water, and ventilation settings.
How to activate a function to heat the hot water cylinder for one hour.
How to activate a function to switch off heating, hot water, circulation, and cooling.
How to interpret and act on maintenance messages.
How to interpret and clear fault messages and contact the competent person.
Instructions for cleaning the product casing.
States that decommissioning should be done by a competent person.
Advises to observe recycling and disposal information from installation instructions.
Conditions for Vaillant manufacturer's warranty.
How to find contact details for customer service.
Provides product data related to EU regulations on energy efficiency.
Lists available operating modes and their settings.
Details of functions available to the end user, with values, units, and default settings.
Lists common symptoms, possible causes, and recommended measures for troubleshooting.
Explains maintenance messages, their codes, descriptions, work required, and intervals.
To Next Page
