Vaillant VWL Series User Manual

Appendix
12
Setting level Values Unit Increment, select Factory setting Setting
Min. Max.
Building circuit water pressure Current value bar
Building circuit flow rate Current value l/h
Compressor anti-cycling time Current value min
Immersion heater anti-cycling
time
Current value min
Target flow temp. Current value ℃
Current flow temp. Current value ℃
Energy integral Current value °min
Cooling capacity Current value kW
Electrical power consumption Current value kW Total power consump-
tion of the heat pump
without any external
components connec-
ted (as supplied).
Compressor modulation Current value %
Air inlet temperature Current value ℃
Immersion heater power Current value kW
External current anode status Current value Anode not con-
nected
Outdoor temperature Current value ℃
Information →
Contact details Phone number
Serial number Permanent value
Operating hours total Cumulative value h
Hours heating Cumulative value h
DHW operating hours Cumulative value h
Cooling op. hours Cumulative value h
Default settings →
Language Current language Languages available for
selection
02 English
Display contrast Current value 1 25
15 40
Resets →
No sub-items available
*If no system control is installed, the menu item is displayed in the product's control panel.

Vaillant VWL Series Specifications

General

Type	Air-to-water heat pump
Refrigerant	R32
Operating Temperature Range (Heating)	-20°C to +35°C
Power Supply	230 V / 400 V, 50 Hz
Weight	90 - 150 kg