When updating the setup file, load the new setup file and make sure it
functions correctly. Check that you have retrieved all the necessary information from the
log memory, and then erase the log memory with the LOGFS ERASE command.
CAUTION!
1. In AWS Client, select Settings > Options.
2. Select Secure Setup Upload.
Secure setup upload attempts to keep a valid setup in the QML data logger at all times,
which minimizes the risk of the logger becoming inaccessible for remote maintenance if
an error occurs during setup update.
3. To save the changes, select Save.
4. Select Maintenance > Setup File > Upload to Logger.
Chapter 4 – AWS Client Usage
43
To Next Page
Loading...
