5. Vaisala Insight Software
Vaisala Insight PC software can be used to check, configure, and adjust HMDW110 series
transmitters intuitively without typing any serial commands. The transmitter can be connected
to Vaisala Insight software using a Vaisala USB cable for computer connection (219690).
With the Insight software, you can:
• See device information and status.
• See real-time measurement.
• Configure serial communication settings, filtering factor, and analog output parameters
and scaling.
• Calibrate and adjust the device.
1 HMDW110 settings and adjustment functions are available through the settings wheel in
the Insight Devices view.
Insight software guides you when changing the settings and performing adjustments on the
transmitter. However, please read carefully Calibration and Adjustment (page 54) before
performing adjustments on your HMDW110 device.
HMDW110 transmitters support Insight from transmitter software version 2.2.3
onwards.
Download Vaisala Insight software at www.vaisala.com/insight.
Chapter 5 – Vaisala Insight Software
29
To Next Page
Loading...
