User's Guide ______________________________________________________________________
28 __________________________________________________________________ M210566EN-J
Wall Mounting with Wall Mounting Kit
When mounting with wall mounting kit the mounting plate (Vaisala
order code 214829) can be installed directly on wall or onto a standard
wall box (also US junction box). When wiring through back wall, remove
the plastic plug from the wiring hole in the transmitter before mounting.
0503-004
Figure 7 Mounting with Wall Mounting Kit
The following numbers refer to Figure 7 above:
1 = Plastic mounting plate
2 = Mount the plate to wall with 4 screws M6 (not provided)
3 = Arched side up
4 = Attach the HMT330 to the mounting plate with 4 fixing
screws M3 (provided)
5 = Holes for wall/junction box mounting
0804-065
Figure 8 Dimensions of the Plastic Mounting Plate (mm/inch)
To Next Page
Loading...
