Vaisala HUMICAP HMT360 SERIES - DIP Switch Functions

Chapter 4 ________________________________________________________________ Operation
VAISALA_______________________________________________________________________ 43
CHAPTER 4
OPERATION
This chapter contains information that is needed to operate this product.
Local Interface
HMT360 transmitter has four pushbuttons located on the housing cover.
The transmitter can be ordered either with or without a local display. The
display/keypad commands (see Display/Keypad Commands on page 46)
can be used to scale the outputs and select special output quantities (if the
transmitter configuration includes special output quantities). The optional
display shows the measurement results.
The keypad pushbuttons are indicated (from left to right) as C, Up, Dn, and
E (see Figure 22 on page 43):
0603-039
Figure 22 Local Display/Keypad Interface