Vaisala HUMICAP HMT360 SERIES - Outputs; General; Table 12 Output Specifications; Table 13 General Specifications

User’s Guide ______________________________________________________________________
76 ___________________________________________________________________ M010056EN-I
Outputs
General
Table 12 Output Specifications
Property Description / Value
Two analog outputs (one standard, one
optional)
two wire 4 ... 20 mA
Typical accuracy of analog outputs at
+20 °C
± 0.05 %/°C full scale
Typical temperature dependence of analog
outputs
± 0.005 %/°C full scale
RS232C serial output for service use only
in safe area
connector type RJ45
WARNING
Output connections are made via safety barriers.
Table 13 General Specifications
Property Description / Value
Operating voltage
with serial port (service mode)
12 ... 28 V
15 ... 28 V
Connections screw terminals,
0.33 ... 2.0 mm
2
wires
(AWG 14-22)
Cable bushings M20×1.5 (7.5 ... 12 mm)
M20×1.5 (10.5 ... 15 mm)
Conduit fitting M20×1.5 / NPT 1/2"
Operating temperature range for electronics
with display
Storage temperature range
-40 ... +60 °C
-20 ... +60 °C
-40 ... +70 °C
Housing material G-AlSi 10 Mg (DIN 1725)
Housing classification IP 66 (NEMA 4X)
Housing dimensions 164 × 115 × 62 mm
Housing weight 950 g
Probe material Stainless steel (AISI 316L)
Fully electromagnetically compatible
according to standards
EN 61326-1: Electrical
equipment for measurement,
control and laboratory use -
EMC requirements; Industrial
environment