2.6 Wireless Configuration Interface
Overview
Indigo transmitters are configured using a wireless browser-based configuration interface
(requires a mobile device or computer with IEE 802.11 b/g/n WLAN wireless connectivity). In
addition to probe and transmitter configuration and calibration, you can also use the
wireless interface to view measurement data and status information.
Figure 8 Desktop and Mobile Example Views
The wireless configuration interface has two user levels:
• All users have view-only access (no configuration rights, not password protected).
• Personnel that carry out configuration tasks can log in with an administrative password
that allows changing the transmitter and probe settings.
To use the wireless configuration interface to modify the settings of your Indigo transmitter
and the connected probe, you must
first enable the transmitter's wireless connection and
then connect to Indigo with your mobile device or computer. Most major browsers (for
example, Firefox, Chrome, Safari, and Internet Explorer) are supported: using the most
recent version is recommended.
More Information
‣
Connecting to Wireless
Configuration Interface (page 26)
‣
Logging in to Wireless Configuration Interface (page 28)
‣
Wireless Interface Menus (page 25)
‣
Indigo Wireless Connection Troubleshooting (page 65)
Chapter 2 – Product Overview
15
To Next Page
Loading...
