Vaisala Indigo 201 - Status View: Relays

4.3.1 Changing User Level
A link that allows logging in with a dierent user level is included in the upper right corner of
all menu views. The text of the link shows the current user level.
1
Figure 17 User Level (User/Admin) in Upper Right Corner of Menu View
1 Current user level (User/Admin): select the text or icon to log in with a dierent user
level
To change between the User and Admin user levels:
1. Select the link that shows the current user level (User or Admin) on the upper right
corner of any menu view.
Selecting the link logs you out of the interface, and a new login is required.
2. The login screen opens. Log in as User or Admin.
You must be logged in as Admin to start and close the calibration
mode. When you have started calibration mode, you must always close the
calibration mode to return to normal operating mode. Measurement performance
can be aected when operating in calibration mode.
CAUTION!
More Information
‣
Starting and Closing Calibration Mode (page 54)
Chapter 4 – Wireless Configuration Interface
29