Vaisala Indigo 202 - Indigo Display Functionality

1.8 Connecting to Wireless Configuration
Interface
Select WLAN to connect to:
1. WLAN XYZ
3. WLAN ABC
2. Indigo_ID[xx]
1
3
500
ppm
WLAN on

Indigo 200
2

Carbon dioxide concentration
Figure 6 Enabling and Accessing Indigo's Wireless Configuration Interface
1 Wireless connection activation button
2 Wireless connection indicator (WLAN symbol) on the Indigo display
3 Choose Indigo (Indigo_ID[xx]) from your wireless device's list of available connections
To connect to the wireless configuration interface:
1. Press the wireless connection activation button on the bottom of the transmitter.
2. When the wireless configuration interface becomes available, the Indigo display shows
a connection notification. In the Indigo models with an LED indicator, the LED blinks
green when the connection is active.
3. Open the wireless connection menu in your mobile device or computer and select
Indigo_ID[xx]
(transmitter-specific SSID) from the list of available connections.
4. Depending on your device, the wireless configuration interface either launches
automatically in your browser after you connect to Indigo, or you may need to start
your browser application manually.
5. When you open the Indigo interface in your browser, you are prompted to log in.
Only one device can be connected to the wireless
configuration interface at a time.
For more information and troubleshooting instructions on accessing Indigo 202 wireless
configuration interface, see Indigo 202 User Guide.
M211967EN-E
12