2.6
Wireless Configuration Interface
Overview
Indigo transmitters are
configured using a wireless browser-based configuration interface
(requires a mobile device or computer with IEE 802.11 b/g/n WLAN wireless connectivity). In
addition to probe and transmitter configuration and calibration, you can also use the
wireless interface to view measurement data and status information.
Figure 7 Desktop and Mobile Example Views
The wireless
configuration interface has two user levels. All users have view-only access (no
configuration rights, not password protected), and personnel that carry out configuration
tasks can log in with an administrative password that allows changing the transmitter and
probe settings.
To use the wireless configuration interface to modify the settings of your Indigo transmitter
and the c
onnected probe, you must first enable the transmitter's wireless connection and
then connect to Indigo with your mobile device or computer. Most major browsers (for
example, Firefox, Chrome, Safari and Internet Explorer) are supported: using the most recent
version is recommended.
More Information
‣
Connecting to Wireless Configuration Interface (page 22)
‣
L
ogging in to Wireless Configuration Interface (page 24)
‣
W
ireless Interface Menus (page 21)
‣
Indigo Wireless Connection Troubleshooting (page 55)
Indigo 202 User Guide M211966EN-A
12
To Next Page
Loading...
