2. Open the transmitter cover.
To avoid damaging the connector pins of the transmitter, pull the
tr
ansmitter cover o the base in a straight angle. Do not twist or bend.
CAUTION!
3. Use a small screwdriver or a similar tool to change the position of the WLAN (1) or
RS-485 t
ermination ON/OFF (2) DIP switches.
4. When done, close the transmitter cover and power on Indigo.
Indigo does not display a notification
about the WLAN functionality being disabled
when a user attempts to enable it with the wireless connection activation button.
Chapter 3 – Installation
19
To Next Page
Loading...
