4. When you have established a connection, open your browser. Depending on your
br
owser and system, you are either directed to the wireless configuration interface's
login screen, or you may need to:
a. open a new browser tab or window, or close and restart your browser, if the browser
was already open when you connected to Indigo's access point.
b. acknowledge the connection in a notification prompt before opening your browser
or a new browser tab or window.
The default IP address of the Indigo transmitter is h
ttp://192.168.1.1/. If you have
trouble opening the wireless configuration interface in your browser, try entering the
IP address in the browser's address bar.
5. When the wireless configuration interface opens in your browser, you are prompted to
log in. F
or instructions, see Logging in to Wireless Configuration Interface.
4.2.2 Connecting with a Mobile Device
To connect to the Indigo wireless configuration interface with a mobile device (phone or
table
t):
1. Enable wireless connectivity (WLAN) from your mobile device's settings.
2. Press the wireless connection activation button on the bottom of the Indigo transmitter
until the transmitter notifies about a WLAN connection being active.
3.
Open your device's wireless connections menu and select Indigo_ID[xx] (transmitter-
specific SSID) from the list of available connections.
4. Depending on device settings, the Indigo wireless configuration interface either opens
automatically in your browser, or you may need to:
a. open your browser application manually after connecting to Indigo
b. acknowledge the connection in a wireless network prompt (check your device's
notifications)
before opening your browser.
5. When the wireless configuration interface opens in your browser, you are prompted to
log in. For instructions, see Logging in to Wireless Configuration Interface.
Mor
e Information
‣
Connecting to Indigo WLAN with iPhone (page 56)
Chapter 4 – Wireless Configuration Interface
23
To Next Page
Loading...
