Vaisala Indigo 202 - Modbus Communication Settings

4.8
Modbus Serial Communication
Settings
The Se
ttings > Outputs menu of the wireless configuration interface contains the
configuration options for Modbus serial communication.
Protocol Modbus protocol options. The Modbus R
TU protocol is in use by default.
Speed Select the baud rate used in Modbus communication: 4800, 9600, 19200,
38400, 57600, or 115200. Default: 19200.
Stop Bits Stop bits used in Modbus communication: 1 or 2. Default: 2.
Parity Select EVEN, ODD or NONE. Default: NONE.
Slave Address Address used when Indigo functions as a Modbus slave (range: 1 ... 247).
Default: 10.
More Information
‣
Modbus Ov
erview (page 39)
Indigo 202 User Guide M211966EN-A
34