Figure 33 Date and time settings page
DGA monitor uses UTC (Coordinated Universal Time) internally. Time and time
stamps in the user interface are shown according to the time zone of the
connecting web browser.
1. In the user interface, select Settings > General.
2. To set date and time manually:
a. Select Set time manually.
b. Select or enter the current date into Date. The format is yyyy-mm-dd.
c. Enter the current time into Time. The field is in 24-hour clock notation in format
hh:mm.
d. Select Apply to save the set time.
Chapter 5 – Commissioning
71
To Next Page
Loading...