3.14 Configuring IEC 61850 protocol
Figure 36 IEC 61850 settings page
IEC 61850 protocol is an optional feature and requires a license. If a license is not
installed on the DGA monitor, you cannot enable the protocol. Contact Vaisala for
acquiring the license.
1. Connect to the user interface as the Admin user.
2. In the user interface, select Settings > Network > IEC 61850.
3. Select if the IEC 61850 protocol should be Enabled or Disabled.
4. Select Apply to save your changes.
Download the following supporting documents from this page:
• IED Capability Description (ICD) file
• Protocol Implementation Conformance Statement (PICS)
• Model Implementation Conformance Statement (MICS)
More information
‣
Connecting to user interface (page 30)
Chapter 3 – User interface
61
To Next Page
Loading...