User's Guide ______________________________________________________________________
24 __________________________________________________________________ M210295EN-H
0705-024
Figure 11 Contents of the Radiosonde Package
3. Remove the radiosonde from the package, free the antenna, and
take the unwinder out of the package.
4. Remove the small plastic rubber wire from the unwinder.
0601-048
Figure 12 Unwinder Details
5. Make sure the plastic lip under which the string runs is level with
the unwinder bottom plate. If the lip is bent, bend it gently back to
level the position.
Proceed to prepare the sounding.
1 = Radiosonde
2 = Unwinder
3=Battery
1 = Rubber wire
2 = Unwinder lip
To Next Page
Loading...