D.7.4 TS Playback on a Local RVP900
Figure 65 TS Playback on Local RVP900
In this example, the TS Switch is set to write data from the tsarchive to the TS API.
RVP9Proc-n processes then reads the time series data from the API.
This is the same as the real-time normal operation case shown in D.7.1 RVP900 in Normal
Real-Time Operation (page 401), except that the archive is the source rather than the real-
time operation.
The
dierence is that applications that use the time series must know that the data are
playback rather than real time data. This information as well as all of the required
housekeeping data are part of the time series data format.
Utility Settings
RVP900:
• TS Switch: Local Archive
• TS Archive: Play
RVP900 User Guide M211322EN-J
404