Vaisala RVP900 - Regulatory Compliances; DC Power Conditions for Use

Function Name Description
rim_asr9_103104cnt_sim_set
Sets the operational mode and simulation override
values for the WP_CX103 and WP_CX104 output levels
rim_asr9_103104cnt_sim_get
Gets the operational mode and simulation override
values for the WP_CX103 and WP_CX104 output levels
Table 146 Deprecated Functions
Function Type Function Names Reason for Deprecation
Mutex functions rim_mutex_define,
rim_mutex_lock,
rim_mutex_unlock.
Mutex functionality exists in the light weight
remote procedure call routines. (lwrpc)
IO functions rim_port_init,
rim_port_read,
rim_port_write,
rim_pld_serial,
rim_board_allow.
Hardware interface no longer exists.
Memory access
functions
rim_mem_read,
rim_mem_write, rim_memset,
rim_mem_read_nomutex,
rim_mem_write_nomutex,
rim_memset_nomutex.
Memory interface no longer exists.
RINPE functions rim_set_rinpe_run,
rim_set_rinpe_run_cmd,
rim_get_pinpe_run.
RINPE hardware interface no longer exists
replaced by Ethernet interface.
RVP simulation
functions
rim_rvp7_simiq,
rim_rvp7_simiq_get.
RVP9 simulation functionality does not exist.
RVP900 User Guide M211322EN-J
452