Vaisala Veriteq viewLinc 4.0 - Discovering Devices

To Next Page

To Previous Page

Chapter 3: System Settings

Discovering Devices

To discover recently attached Vaisala Veriteq devices which may not

show up in the Device Browser automatically:

Note: 300 Series Transmitters are not recognized by

viewLinc using the Discover devices procedure;

use your Digi Discovery software if required.

 Select Options | System Configuration | Device Manager.

Select the host machine you wish to scan, then right click

and select

Discover Devices, or select Options | Host |

Discover Devices

from the device browser in the left

hand panel:

Note: This process may take several minutes, depend-

ing on the number of Vaisala Veriteq devices

and/or components in your network.

Adding Devices

You may want to add a device to your system if:

• discovering devices is taking too long

• you are adding a 300 Series Transmitter device

• you want to add a variety of device types at one time

Note: To add multiple Vaisala Veriteq devices at one

time, see “Discovering Devices” on page 40.