Vakoss VC-715 - Button Function Instructions; Device Controls and Ports Explained

3
ENG
1Up select buon
When taking pictures or recording video, click this buon to zoom in;
In the menu, press to move up the menu selecons;
2Menu Buon
Click this buon to view the funcon set up menu;
3Down select buon
When taking pictures or recording video, click this buon to zoom out;
In the menu, press to move down the menu selecons;
4USB digital port
① Use for connecng to a PC to transmit data;
② Use for connecng to an external power source to charge the baery or
provide a working power source:
5Tripod connector
Connects to car mounts with the set screw hole;
6HDMI cable connector
The HDMI cable connector is used to connect to high definion display equipment
7 Power buon
Press and hold to turn the camera on/off; click to turn the night vision light
on/off;
8 TF card slot
Memory card slot, should be used with high speed TF cards Class 6 or higher
(SDHC cards)
9Lock buon
When recording video push this buon to save and lock the current video file
so that it cannot be deleted;
10) Mode select buon
Click this buon to switch between video/camera/playback modes;
11) OK buon
Video recording or picture taking confirmaon buon, in video mode, click
this buon once to start recording, and click again to stop recording; in
camera mode, click this buon to take a picture; in menu mode, this buon
confirms your selecon;
Buon Funcon Instrucons: