MATERIAL SAFETY DATA SHEET
Hydraulic Fluid
Part No.'s 9036, 9037, 9636, 9636-12, 9637, 9637-4, 9638, 9638-2 and 9616
For emergency information call (612) 347-0591
Material
Formula: Proprietary
Chemical Name or
Synonyms: Hydrocarbon Mixture
Important Components
Ingredient CAS No. TVL (Oil Mist) PEL Approx. %
Solv ref petr-base oil 64741-88-4 5 mg/m
3
- - - 90-96
Olefin Copolymer (oil) 64742-65-0 5 mg/m
3
- - - 0-5
VI Improver (Polymer) 68171-50-6
Zinc Anti-Wear (LZ5178F) comp (Contact Lubrizol Corp. 216-943-4200) 0-1
Physical Data
Appearance: Oily liquid; blue or amber in color
Odor: Mild
pH.: Neutral
Viscosity:
Melting or Freezing
Point:
Boiling Point: Above 600° F
Vapor Pressure
(mm Hg): Not Available
Vapor Density (air=1): Heavier than Air
Solubility in Water: Neg.
Percent Volatile
(by weight): Neg.
Specific Gravity
(water=1): 0.9
Evaporation Rate
(Butyl Acetate=1): Slower than Ether
Fire and Explosion Hazard Data
Flash Point: Above 350°
Auto Ignition Temp.:
Lower Explosion Limit
(%):
Upper Explosion Limit
(%):
Extinguishing Media: Foam, CO
2
, Dry Chemical
Special Fire Fighting Procedure: Wear MSHA/NIOSH-approved, pressure-demand, self-contained breathing
apparatus. Use water spray to cool fire-exposed containers.
Unusual Fire and Explosion Hazards: NFPA Hazard Identification: Health=2, Flammability=1, Reactivity=0
Health Hazard Data
Threshold Limit Value: 5 mg/m
3
on oil mist
Effects of Overexposure: SARA Title III - Zinc content 0.04% wt.
Prolonged or repeated skin contact may cause irritation.
To Next Page
Loading...
