16
EN
Useful information
C
16
EN
Useful information
C
Problems Potential causes Solutions
The food is too warm.
The temperature has not
been set correctly.
Refer to the instructions
on setting the initial
temperature.
A large amount of hot food
was placed in the appliance
over the last 24hours.
Temporarily set the
appliance to a colder
temperature.
The appliance is close to a
heat source.
Refer to the
“Location” chapter
The appliance is too cold.
The temperature is set to
too low a position.
Temporarily set the
appliance to a warmer
temperature.
Unusual noise.
The appliance is not level. Readjust the appliance feet.
The appliance is touching
the wall or other objects.
Move the appliance slightly.
A part (a pipe, for example)
at the rear of the appliance
is touching another part of
the appliance or the wall.
If necessary, bend the part
carefully to move it away.
There is water on the floor.
The water outlet is blocked. Refer to the
“Cleaning and maintenance”
chapter.
The side panels are hot.
This is normal. Heat is
exchanged inside the side
panels.
Wear gloves to touch the
side panels if necessary.
If the malfunction recurs, contact our after-sales service centre.
To Next Page
Loading...
