8
EN
Using the appliance
B
1. Please take out the plug before removal.
2. Remove the lampshade with a
screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
Start to use
•
Before initial start, keep the refrigerator still for two hours before connecting it to power
supply.
•
Before placing any fresh or frozen foods, the refrigerator should have run for 2 - 3 hours,
or for above 4 hours in summer when the ambient temperature is high.
NOTE
This product is not recommended for use with sockets or
main switch with the A/ GFCI function, otherwise it may
cause false tripping.
1. It’s not pose a safety risk when tripped.
2.
If tripping persists, it is recommended to replace the
sockets or main switch without A/GFCI function.
To Next Page