EasyManua.ls Logo

VALBERG 4D 474 E X 625C - Page 18

VALBERG 4D 474 E X 625C
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
EN
Using the appliance
B
5
Fruit/vegetable icon
6
Drink icon
7
Meat icon
A Temperature up button
B Temperature zone selection button
C Temperature down button
D Vario temp select
E Lock/Unlock button
Operation instructions
Display
When electrify the refrigerator, the display screen will total display for 3 seconds. Meanwhile
the starting up bell rings and then the screen enters the normal display of the operation.
The first time for using the refrigerator, the default set temperature of refrigerating
chamber and freezing chamber is 4° C/-18 °C respectively.
When the error occurs, the display shows the error code (see next page); during normal
running, the display shows the set temperature of the refrigerating chamber or freezing
chamber.
Under normal circumstances, if there is no operation on display panel or door opening
action within 30s, then the display is lock, and the sate
goes out.
Lock /unlock
In the unlocked state, long press the lock button
for 3 seconds, enter the
lock state, the logo goes outand buzzer sounds, it means the display panel is locked, at
this time, button operation cannot be implemented;
In the locked state, long press the lock button for 3 seconds, enter the
unlocked state, the logo lights up and buzzer sounds, it means the display panel is unlocked,
at this time, button operation can be implemented;

Related product manuals