28 FR
Using the appliance
B
Setting the rinse aid compartment
• To achieve optimum drying performance with the least amount of rinse aid, the dishwasher
is designed to adjust consumption according to the user.
• Please follow the steps below.
1. Open the appliance door and switch on the appliance.
2. Within 60 seconds of powering up, press and hold the “Programs” button for more than
5 seconds, then press the “Delayed Start” button to enter the setting mode; the rinse aid
indicator will ash at a frequency of 1 Hz.
3. Press the “Programs” button to select the right setting as usual.
The order in which the settings are displayed is as follows: D1 -> D2 -> D3 -> D4 -> D5 -> D1.
The higher the number, the more rinse aid the dishwasher will use.
4. The setting will be saved if the power button is pressed or if no action is taken for 5
seconds.
To Next Page
Loading...
