VALBERG 973120 - Page 5

7
EN
Using the appliance
B
6
EN
Preview of the appliance
A
door hinges
Professional repairers and
final users
At least 7 years after the
last model is launched on
the market
trays
Professional repairers and
final users
At least 7 years after the
last model is launched on
the market
baskets
Professional repairers and
final users
At least 7 years after the
last model is launched on
the market
door gaskets
Professional repairers and
final users
At least 10 years after the
last model is launched on
the market
The shortest period for providing after-sales spare parts is 15 working days.
The model information inthe product database, as well as the model identifier, can be
obtained througha weblink scanned by a QR code on the energy efficiency label of the
product.
Dear customer
1. If you want to return or replace the product, please contact the store where you buy.
(Remember to bring the purchase invoice)
2. If your product breaks down which needs to repair, please contact after-sales service
provider.
Proper use of refrigerator
Placement
• Before use, remove all packing materials, including bottom cushions, foam pads and tapes
inside of the refrigerator; tear off the protective film on the doors and the refrigerator body.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in moist or watery
places to prevent rust or reduction of insulating effect.
• Do not spray or wash the refrigerator; do not put the refrigerator in moist places easy to be
splashed with water so as not to affect the electrical insulation properties of the refrigerator.
• The refrigerator is placed in a well-ventilated indoor place; the ground shall be flat, and
sturdy (rotate left or right to adjust the wheel for leveling if unstable).