15 FR
Nettoyage et entretien
C
15 EN
Cleaning and maintenance
C
Repair
Anomaly Possible cause Solution
The appliance does not
work.
The appliance is switched off.
The power outlet is not
plugged in or is loose.
The fuse has blown or is
defective
The plug is defective.
Press the Adjust button for
5 seconds to turn on the
appliance.
Connect the plug.
Check the fuse and replace it if
necessary.
Operating malfunctions are to
be corrected by an electrician.
Food is too hot. The temperature is not
properly adjusted.
The door was open for an
extended period.
A large quantity of warm
food has been placed in the
appliance within the last 24
hours.
The appliance is near a heat
source.
Please see the
Initial
temperature setting section.
Open the door only for the
necessary time.
Turn the temperature
controller temporarily to a
cooler setting.
Please see the
Installation
location
Excessive cooling of
the appliance.
The temperature is set too
cold.
Turn the temperature control
knob temporarily to a cooler
setting.
Unusual noises The appliance is not level
The appliance is touching the
wall or other objects.
A component, for example
a pipe, on the back of the
appliance is touching another
part of the appliance or the
wall.
Adjust the wooden unit if it is
not level.
Move the appliance slightly.
If necessary, carefully bend
the component to leave more
space.
There is water on the
floor.
The water drainage hole is
clogged.
See the Cleaning section.
If the malfunction continues, contact the repair centre.
To Next Page
Loading...
Need help?
General
