24
EN
Useful information
C
1
Open the loading door.
2
Pull up the lint filters to remove it.
3
Open the outer filter.
4
Clean the outer filter by your hands or using a soft cloth.
5
Open the inner filter.
6
Clean the inner filter by your hands or using a soft cloth.
7
Close the filters and fit the hooks.
8
Place inner filter inside of outer filter.
9
Refit the Lint filter.
• After the dryer has been used for a certain period of time, if
you encounter a layer that will cause obstruction on the filter
surface, wash the filter with warm water to clean the layer.
Dry the filter thoroughly before reinstalling it again.
To Next Page
Loading...
