27
EN
Useful information
C
If the drying process is completed, open the loading door and
wait for it to cool down.
1
Open the kick plate cover as shown.
2
Unlock the exchanger cover by turning in the direction
shown with arrows.
3
Take out the exchanger cover as shown.
4
Clean the front surface of the exchanger as shown.
5
Fit the exchanger cover as shown.
6
Lock the exchanger cover by turning in the direction shown
with arrows.
7
Close the kick plate cover as shown.
WARNING:
Do not clean with bare hands since the exchanger fins are
sharp. They may hurt your hands.
To Next Page
Loading...
