52 53EN EN
Useful information
C
Notes
Error codes
If there is a malfunction the dishwasher will display an error code. The following table shows
possible error codes and their causes.
Codes Meaning Possible causes
E1
Longer inlet time.
Faucets is not opened, or water
intake is restricted,or water
pressure is too low.
E3
Not reaching required
temperature.
Malfunction of heating element.
E4
Overflow. Some element of dishwasher leaks.
Ec
Failure of the washing control
system.
Defective PCB, drain pump or motor
failure.
L4
Motor failure. Motor failure.
Ed
Failure of communication
between main circuit board with
display circuit board.
Open circuit or break wiring for the
communication.
WARNING
• If overflow occurs, turn off the main water supply before
calling a service.
• If there is water in the base pan because of an overfill or
small leak, the water should be removed before restarting
the dishwasher.
• If there is an error code that cannot be solved, please
request professional assistance.
To Next Page
Loading...
Need help?
General
