12
NOTE: When emptying the dirty water cup, make sure you use a drain or sink
strainer to avoid blockage to your drain by the dirts.
Self-clean
NOTE:
We recommend that you:
•
Clean the dirty water cup before and after performing the Self-clean function.
•
Clean the charging base right away if any dirty residues remain on the charging
base after using the Self-clean function.
1. To perform rolling brush self-cleaning, place the Floorwasher back to the charging base
after use.
2.
While the Floorwasher is in the charging base, standing upright, press the Self-clean
button on the handle to start .
3.
After performing the self-cleaning, the Floorwasher enters charging mode and starts
the process of auto air-drying the rolling brush.
Product usage
B
To Next Page
Loading...