EasyManua.ls Logo

VALBERG SBS 442 E W742C - Installation

VALBERG SBS 442 E W742C
84 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
FR
Utilisation de l’appareil
B
7
EN
Using the appliance
B
by a qualified electrician or other competent person.
An approved maintenance centre should carry out maintenance on this appliance; Only
original spare parts may be used.• Do not put hot food in the appliance.
Do not pile food up; this prevents the air from circulating properly;
Make sure that food does not touch the back of the compartment(s).
In the event of a power cut, do not open the door(s).
Do not open the door(s) too often.
Unpack the appliance and check that it is not damaged. Do not connect the appliance if it is
damaged. Notify the sales outlet from which you purchased the appliance immediately in case
of damage. Keep the packaging in this case.
We recommend waiting for at least four hours before connecting the appliance to allow the
oil to return to the compressor.
Make sure that air can circulate freely around the appliance to prevent overheating. Follow
the installation instructions to guarantee sufficient ventilation.
Wherever possible, the product spacers should be installed against a wall so that users are
not at risk of touching or catching hot parts (compressor, condenser) and therefore not at risk
of burns.
The appliance must not be installed in the vicinity of radiators or cookers.
Make sure that the mains socket remains accessible once the appliance has been installed.
Any electrical operations required when maintaining the appliance should be carried out
Installation
NOTE
Follow the instructions provided in the corresponding
paragraphs for all electrical connections.

Related product manuals