VALBERG WF 1014 A W180C3 - Connect the drain hose

13 EN
Using the appliance
B
Connect the drain hose
12. If the drain hose is already installed as in the diagram below.
Unhook it from the right-hand clip only (see arrow).
13. Connect the drain hose to the siphon or fasten it to the edge of a sink using the U-bend.
If it is not already installed, attach the U-bend (E) to the end of the drain hose.
NOTES:
Ǫ1EOIWYVIXLEXXLIHVEMRLSWIMWRSXOMROIH
Ǫ7IGYVIXLILSWIWSXLEXMXGERRSXJEPP%JXIVXLI[EWLMRK
phase, the machine drains the hot water.
Ǫ7QEPP[EWLFEWMRWEVIRSXWYMXEFPIJSVXLMWTYVTSWI
Ǫ8SPIRKXLIRXLITMTIYWIETMTISJXLIWEQIX]TIERH
secure the fittings with clips.
Ǫ1E\SZIVEPPPIRKXLSJXLIHVEMRLSWIQ