VALBERG WF 1014 A W180C3 - Draining the waste water

34 EN
Using the appliance
B
Draining the waste water (depending on the model)
Ǫ &IJSVIHVEMRMRKXLI[EWXI[EXIVW[MXGLSJJERHYRTPYKXLIETTPMERGIJVSQXLIQEMRW.
Remove the pump cover and place a container underneath.
1. Pull the emergency drain hose from the machine.
2. Place the end of the emergency drain hose in a container.
3. Unscrew the emergency drain hose cap and remove it once it has been loosened.
4. Wait until the water flows naturally.
5. Refit the emergency drain hose cap.
6. Fill the dispenser drawer with 1 L of water to check the emergency drain hose. Check that
there is no leakage at the connection of the hose cap.
7. Put the emergency drain hose back in its storage position.
2