6
Installation
Installation area
Warning!
• Stability is important to prevent the product from wandering! Make sure the
machine is standing leveled and stable.
• Make sure that the product does not stand onto the power cord.
•
Make sure to maintain the minimum distances from the walls as shown in
the picture.
Before installing the machine, the location characterized as follows shall be selected:
• Rigid, dry, and level surface
• Avoid direct sunlight
• Sufficient ventilation
• Room temperature is above 0°C
• Keep far away from the heat sources such as coal or gas burning appliances.
Unpacking the washing machine
Warning!
• Packaging material (e.g. Films, Styrofoam) can be dangerous for children.
• There is a risk of suffocation! Keep all packaging well away from children.
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packaging.Make sure the small triangle
foam (a) is removed with the bottom packaging together. If not, lay the unit down on the
side surface and remove it manually.
Product usage
B
To Next Page
Loading...
Need help?
General