28 EN
Using the appliance
B
Start/Pause button
By pressing on the Start/Pause button, you may start the programme you have selected or
suspend a running programme. If you switch your machine to the standby mode, the Start/
Pause led on the electronic display will blink.
Child Lock
•
The Child Lock function allows you to lock the buttons so that the wash cycle you have
chosen cannot be changed unintentionally.
•
To activate child lock, press and hold button 6 and 7 simultaneously for at least 3 seconds.
‘’CL’’ will ash on the electronic display for 2 seconds when the child lock is activated.
•
If any button is pressed or selected programme is changed by the programme dial while
the child lock is active, the “CL” symbol will ash on the electronic display for 2 seconds.
•
If the child lock function is active and a programme is running, when the programme
dial is turned to the “O” position and another programme is selected the previously
selected programme continues from where it was left.
•
To deactivate the child lock, press and hold button 6 and 7 simultaneously for at least
3 seconds until the “CL” symbol on the electronic display disappears.
To Next Page
Loading...
